SCS
- Fork
- No thread. Built for SCS.
- Bar
- Standard (28 mm inside) or oversized (32 mm inside).
- Clamp
- SCS clamp. Available with shims, so it fits bars of both 32 and 35 mm outside.
Guide
Compression is the set of parts that holds the handlebar (the bar) and the fork together. It comes in three kinds: SCS, HIC and IHC. They cannot be mixed freely.
If you bought a complete scooter, its parts already fit together. This page only matters when you buy loose parts.
Choose your scooter once. Then the page of every fork, bar and clamp tells you whether the part fits it.
Your scooter:Your setup:
What do you ride?
Choose your scooter
Which fork/compression do you have?
How thick is your bar on the inside?
Decides whether the bar fits over the fork.
How thick is your bar on the outside?
The clamp must match the outside diameter of the bar, unless it has a shim.
Which clamp do you have?
Look at the product page of your scooter or your fork. In our shop the system is in the name of the fork, for example SCS/HIC. If in doubt, ask customer service.
How to find out in 1 minuteA guide only. If parts on the scooter have been changed, the answer may differ.
Choose a 32 or 35 mm clamp to match the bar. Or choose a clamp with a shim. See clamps
A guide only. If parts on the scooter have been changed, the answer may differ.
A guide only. If parts on the scooter have been changed, the answer may differ.
A guide only. If parts on the scooter have been changed, the answer may differ.
Choose a 32 or 35 mm clamp to match the bar. Or choose a clamp with a shim. See clamps
A guide only. If parts on the scooter have been changed, the answer may differ.
A guide only. If parts on the scooter have been changed, the answer may differ.
A guide only. If parts on the scooter have been changed, the answer may differ.
Start with the fork. It decides which bar and clamp you need.
Find your fork and see whether your bar fits.
| Fork | Standard bar 28 mm inside | Oversized bar 32 mm inside |
|---|---|---|
| SCS | Fits Use an SCS clamp. | Fits Use an SCS clamp. |
| HIC | Does not fit Choose an oversized bar (32 mm inside).Oversized bars (32 mm inside) – for HIC and SCS | Fits The bar must have a slit. |
| IHC | Fits The bar must have a slit. | Does not fit Fix: an IHC to HIC converter. Or choose a standard bar (28 mm inside).Standard bars (28 mm inside) – for IHC and SCS |
If your fork takes several systems, for example SCS/HIC, it is enough that one of them fits the bar. The clamp must then match that system: SCS needs an SCS clamp.
You can keep your bar. An IHC to HIC converter goes over the compression tube of the fork and makes the bar fit.
| Part | Must match | What to check |
|---|---|---|
| Bar | The system of the fork, and the clamp. | Inside diameter: 28 or 32 mm. Outside diameter: 32 or 35 mm. Whether the bar has a slit. |
| Fork | The system. | SCS, HIC or IHC. |
| Clamp | The outside diameter of the bar, and the system. | 32 or 35 mm. For SCS it must be an SCS clamp. |
| Standard | 28 mm |
|---|---|
| Oversized | 32 mm |
| Standard | 32 mm |
|---|---|
| Oversized | 35 mm |
| Type | Diameter | Hub width |
|---|---|---|
| Standard wheels | 100, 110 or 120 mm | 24 mm |
| Wide hub | 110, 115 or 120 mm | 30 mm |
The parts that hold the fork, deck and bar together. With the wrong choice the scooter cannot be assembled.
Look at the product page of your scooter or your fork. In our shop the system is in the name of the fork, for example SCS/HIC. If in doubt, ask customer service.
Not freely. A compression part must have the same system as the fork. Some forks take several systems, and then one shared system is enough.
You have 365 days to return it.
Put your parts in the cart. If we can see that two parts do not fit together, the cart says so and suggests parts that do.